Table of Contents
Advertisement
4.1.6 Controlled Configuration
The clients of Controlled Port need authentication before they can access the network. In this section, you can set
the related configuration of Controlled Port.
Controlled
Operation Mode: Choose one of the two modes, NAT mode and Router mode, according to requirements.
IP Address: Enter the desired IP address for the interface of the controlled port.
Subnet Mask: Enter the desired subnet mask for the controlled port.
DHCP Server Configuration
There are three types of DHCP server methods: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay.
1. Disable DHCP Server: Disable DHCP Server function of Edimax AC-M3000.
2. Enable DHCP Server: Choose Enable DHCP Sever function and set the appropriate configuration for the
built-in DHCP server of Edimax AC-M3000. The fields with red asterisks are required. Please fill in these
fields.
31
Edimax AC-M3000/AC-M1000
User's Manual
Advertisement
Table of Contents
