Table of Contents
Advertisement
Static IP Address: Specify the IP Address, Subnet Mask and Default Gateway of WAN2 Port, which should
be applicable for the network environment. The probe target supports up to three URLs. Check the "Warning of
Internet Disconnection" box to work with the WAN Failover function.
If WAN Failover function is enabled, when WAN1 connection fails, the traffic will be routed to WAN2
automatically. If "Fallback to WAN1 when possible" function is enabled, the routed traffic will be back to
WAN1 when WAN1 connection is recovered.
Dynamic IP Address: Select this item when WAN2 Port can obtain an IP address automatically. For example, a
DHCP Server is available for WAN2 Port. The probe target supports up to three URLs. Check "Warning of
Internet Disconnection" box to work with the WAN Failover function.
29
Edimax AC-M3000/AC-M1000
User's Manual
Advertisement
Table of Contents
