D-Link DWL-3200AP - AirPremier - Wireless Access Point Product Manual page 34

DWL-3200AP User's Manual
Advanced > DHCP Server > Static Pool Settings
DHCP Server
Assigned IP:
Assigned MAC
SubMask:
Gateway:
D-Link Systems, Inc.
Dynamic Host Configuration Protocol assigns IP addresses to
Control: wireless devices on the network. This protocol simplifies network
management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign IP
addresses.
Select Enable to allow the DWL-3200AP to function as a DHCP
server.
Use the Static Pool Settings to assign the same IP address to a
device at every restart.The IP addresses assigned in the Static Pool
list must NOT be in the same IP range as the Dynamic Pool. After you
have assigned a static IP address to a device via its MAC address,
click Apply; the device will appear in the Assigned Static Pool at
the bottom of the screen. Edit or delete the device in this list.
Enter the MAC address of the device here.
Address:
Enter the subnet mask here.
Enter the IP address of the gateway on the network.
Using the Configuration Menu
34