Wg602 V2 Wireless Access Point Rear Panel; Power Socket; Reset And Restore To Factory Defaults Button; Rj-45 Ethernet Port - NETGEAR WG602 - 54 Mbps Wireless Access Point Reference Manual

Reference Manual for the WG602 v2 54 Mbps Wireless Access Point

WG602 v2 Wireless Access Point Rear Panel

Reset & Restore
Power
Button
Socket
Figure 2-2: WG602 v2 rear panel

Power Socket

This socket connects to the WG602 v2 power adapter.

Reset and Restore to Factory Defaults Button

The reset and restore to defaults button located between the Ethernet RJ-45 connector and the
power socket resets the WG602 v2 when pushed once or restores to the factory default settings
when pushed and held for 10 seconds.

RJ-45 Ethernet Port

Use the WG602 v2 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as
a hub, switch, or router.

Detachable Antenna

The WG602 v2 provides a detachable antenna. Be sure the antenna is securely fastened.
2-6
Detachable
RJ-45 Ethernet
Antenna
Port
M-10181-03
Introduction