Figure 5-19: Setup Wizard's Secureeasysetup Screen; Figure 5-20: Secureeasysetup Logo; Figure 5-21: Additional Information - Hardware Button; Figure 5-22: Additional Information - Software Button - Linksys WRT54GS User Manual

Wireless-G Broadband Router with SpeedBooster
12. The Router provides a Web-based Utility you can use for configuring the Router from any networked PC.
Password - Enter a password that will control access to the Utility.
NOTE: SecureEasySetup uses WPA-Personal encryption. If your current wireless devices do not
support WPA-Personal security, then you cannot use SecureEasySetup on your network. You will
need to manually configure your network security using the encryption supported by your
existing devices.
Confi
rm -
Enter the password again in the Confirm field.
Click the Next button to continue or the Back button to return to the previous screen.
13. There are two ways to configure the Router's wireless settings, SecureEasySetup and manual configuration.
If you have other SecureEasySetup devices, such as notebook adapters or printers, then you can use the
Router's SecureEasySetup feature to create your wireless network. Proceed to the section, "Using the
Router's SecureEasySetup Feature."
If you do not have other SecureEasySetup devices, then proceed to the section, "Manually Configuring the
Router's Wireless Settings."
Chapter 5: Setting up the Wireless-G Broadband Router
Using the Setup Wizard

Figure 5-19: Setup Wizard's SecureEasySetup Screen

Figure 5-20: SecureEasySetup Logo

Figure 5-21: Additional Information - Hardware Button

Figure 5-22: Additional Information - Software Button

23