Configure Wpa/Wpa2 Passphrase; Using The D-Link Connection Manager - D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR User Manual

Product manual
Hide thumbs Also See for DWA140 - RANGE BOOSTER N USB ADAPTOR:
Table of Contents

Advertisement

Section 4 - Wireless Security
Using the D-Link Wireless Connection Manager
It is recommended to enable WPA-PSK on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WPA-PSK passphrase being used.
1. Open the Wireless Connection Manager by double-clicking on
the D-Link icon on your desktop.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect. If the network is using WPA-PSK, the
screen (as shown to the bottom-right) will appear.
3. Enter the WPA-PSK passphrase exactly as it is on your wireless
router or access point. Click the Show text in the password
field box to see the passphrase. Unchecking it will hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to
connect.
If you would like to create a new network and enter the WPA-PSK
settings, refer to the next page.
D-Link DWA-140 User Manual

Configure WPA/WPA2 Passphrase

1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rangebooster n dwa-140

Table of Contents