Advertisement
Available languages
Available languages
14
required, go to Internet Settings and select Clone the MAC Address. This will copy the
MAC address of your computer onto the Internet port of the Router.
• Some Cable providers authenticate to the user's Host Name. If this is required, go to
Internet Settings and enter the host name of your computer into the Host Name field.
DSL Internet Connections
• If you have an existing DSL line and have PPPoE or PPTP client software installed on
your computer, you will need to disable it. See section 2.
• If your DSL line uses PPPoE or PPTP, go to Internet Settings and ensure that the
correct IP Allocation mode is selected. Check that your Username and Password are
correct.
• Some DSL providers require the use of a PPPoE Service Name. If this is required, go
to Internet Settings and enter the PPPoE Service Name in the field provided. If it is not
required, you must leave it blank.
Wireless Configuration
If you are unable to access the wireless LAN:
• Ensure that the wireless client is set to infrastructure mode.
• If you have a wired and wireless NIC in the same computer, ensure that the wired NIC
is disabled. See section 5 for details.
• Ensure that the Service Area Name (SSID) is the same for the wireless client and the
Advertisement
