Introduction; Inlink; Installing The Stand Or Wall-Mount Bracket; Installing The Stand - Insignia NS-39E340A13 User Manual

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-39E340A13 represents
the state of the art in LCD TV design and is designed
for reliable and trouble-free performance.

INlink

Enjoy the benefit of having HDMI CEC-compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Align the front of the stand column with the
front of the base, then insert the stand column
into the base making sure that the groove in the
stand column aligns with the ridge in the base.
Secure the stand column to the base with three
M5 x 12 mm screws (provided).
Screw type Screw length # of screws
M5
Ridge
4
Insignia 39" 1080p LED TV
39 for
12 mm 8
Groove
www.insigniaproducts.com
NS-39E340A13 Insignia 39" 1080p LED TV
3 Align the stand cover with the stand column,
then secure the stand cover to the stand column
with one M5 × 12 mm screw (provided). Make
sure that the bottom of the stand cover is flush
against the top of the stand column.
Stand cover
Stand column
4 Secure the stand cover to the TV using four M5
× 12 mm screws (provided).

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load
capacity. (See "Miscellaneous" on page 47.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the base is attached, remove the four screws
that secure the stand cover to the screen, then
remove the cover, stand column, and stand.
Back view