Insignia NS-39E340A13 User Manual page 14

Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI3/DVI jack to connect a cable
or satellite box using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI3/DVI jack on the side of your TV.
Cable or satellite box
5 Connect a 3.5mm audio cable (not provided) to
the PC IN PC/DVI AUDIO IN jack on the side of
your TV and to the AUDIO OUT jacks on the
cable or satellite box.
Note
When you connect the audio using the
PC IN PC/DVI AUDIO IN jack, the audio output is
analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 19.
10
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Side of TV
www.insigniaproducts.com
NS-39E340A13 Insignia 39" 1080p LED TV
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
video jacks on the back of your TV and the
component video out jacks on the cable or
satellite box.
Cables are often color-coded
to match color-coded jacks.
Back of TV
Cable or satellite box
4 Connect an audio cable (not provided) to the
COMPONENT IN L/R audio jacks on the back of
your TV and to the audio out jacks on the cable
or satellite TV box.
Note
When you connect the audio using the
COMPONENT IN L/R audio jacks, the audio output is
analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 19.
, and P
B R
Component video
cable
Audio cable