Set The Date And Time - JVC GZ MS130B - Everio Camcorder - 800 KP Instructions Manual

Date/Time Setting
Open the LCD monitor to
turn on the camcorder
Power Button
LCD monitor
Select [YES] within
10 seconds
Slide your finger up and down on
the sensor. Then touch OK
SET
•
When the message disappears, press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
.
SET DATE/TIME!
YES
NO
Select [CLOCK SETTING]
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET THE CITY, DATE AND TIME
SET
Select the city closest to
the area where you use
the camcorder
AREA SETTING
SET
Select [ON] if daylight
saving time is effective.
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
NOV.1.2009 04.55PM
SET DAYLIGHT SAVING TIME
SET

Set the date and time

Touch sensor: Sets the date and time
: Moves the cursor to the right
OK: Clock starts
CLOCK SETTING
DATE
NOV 1 2009
SAVE
QUIT
NOV.1.2009 04:55PM
QUIT
QUIT
TIME
4 55 PM
GMT+ 9:00
QUIT
EN5