Yamaha QY700 Reference page 37

SW4 [] MIDI Sync
Select whether timing will be determined by the internal clock, or by MIDI
Clock messages or MTC received at MIDI IN.
(3) TRANSMIT/RECEIVE DATA
(3-1) CHANNEL VOICE MESSAGE
Transmitted only during recording and playback.
Transmission channel can be turned on/off and the transmit channel set for each
track.
Received only during recording. All channels are always received.
During multi track record, data of MIDI channels 0-15 received on either MIDI IN A
or B will be recorded separately onto tracks 1-16.
* In Record mode, recording is normally Omni ON.
However during multi track record, this will be Omni OFF, and data of MIDI
channels 0-15 received on either MIDI IN A or B will be recorded separately
onto tracks 1-16.
(3-1-1) NOTE OFF
STATUS 1000nnnn(8nH)
NOTE NUMBER 0kkkkkkk
VELOCITY 0vvvvvvv
Only recorded.
During recording, converted into 9nH kkH 00H.
(3-1-2) NOTE ON/OFF
STATUS 1001nnnn(9nH)
NOTE NUMBER 0kkkkkkk
VELOCITY 0vvvvvvv
00000000
During recording, step recording and edit input of velocity can be turned on/off.
(3-1-3) POLYPHONIC KEY PRESSURE
STATUS 1010nnnn(AnH)
NOTE NUMBER 0kkkkkkk
VALUE 0vvvvvvv
(3-1-4) CONTROL CHANGE
STATUS 1011nnnn(BnH)
CONTROL NUMBER 0ccccccc
CONTROL VALUE 0vvvvvvv
All control change messages are recorded and played back.
(3-1-5) PROGRAM CHANGE
STATUS 1100nnnn(CnH)
PROGRAM NUMBER 0ppppppp
(3-1-6) CHANNEL PRESSURE
STATUS 1101nnnn(DnH)
VALUE 0vvvvvvv
(3-1-7) PITCH BEND CHANGE
STATUS 1110nnnn(EnH)
LSB 0vvvvvvv
MSB 0vvvvvvv
(3-2) CHANNEL MODE MESSAGE
The following messages are recorded and played back.
RESET ALL CONTROLLERS
LOCAL CONTROL
OMNI MODE OFF
OMNI MODE ON
MONO MODE ON
POLY MODE ON
(3-3) SYSTEM COMMON MESSAGE
These are transmitted and received as control messages for QY700 functions.
They are not recorded as sequence data.
(3-3-1) SONG POSITION POINTER
STATUS 11110010(F2H)
LSB 0vvvvvvv
MSB 0vvvvvvv
Transmitted when you move to a different measure in Song Play mode.
Received when in Song Play standby.
(3-4) SYSTEM REAL TIME MESSAGE
Not recorded as sequence data.
n = 0 ' 15 TRACK CHANNEL NUMBER
k = 0 (C-2) ' 127 (G8)
v is ignored
n = 0 ' 15 TRACK CHANNEL NUMBER
k = 0 (C-2) ' 127 (G8)
(v 0) NOTE ON
(v 0) NOTE OFF
n = 0 ' 15 TRACK CHANNEL NUMBER
k = 0 (C-2) ' 127 (G8)
v = 0 - 127
n = 0 ' 15 TRACK CHANNEL NUMBER
n = 0 ' 15 TRACK CHANNEL NUMBER
p = 0 ' 127
n = 0 ' 15 TRACK CHANNEL NUMBER
v = 0 ' 127
n = 0 ' 15 TRACK CHANNEL NUMBER
PITCH BEND LSB 0 ' 127
PITCH BEND MSB 0 ' 127
BnH 78H
BnH 7AH
BnH 7CH
BnH 7DH
BnH 7EH
BnH 7FH
SONG POSITION LSB
SONG POSITION MSB
(3-4-1) TIMING CLOCK
STATUS 11111000(F8H)
You can select whether the internal clock will be used as the timing clock, or
whether Timing Clock messages from MIDI IN will be used.
Transmission and reception can be turned on/off independently.
(3-4-2) START
STATUS 11111010(FAH)
Transmission/reception can be turned on/off.
(3-4-3) CONTINUE
STATUS 11111011(FBH)
Transmission/reception can be turned on/off.
(3-4-4) STOP
STATUS 11111100(FCH)
Transmission/reception can be turned on/off.
(3-5) SYSTEM EXCLUSIVE MESSAGE
All system exclusive messages are recorded and played back.
Even if time intervals existed within the actual data that was received, the entire
message between F0 and F7 will be recorded into one timing location. For playback,
an interval time can be specified for each 1K bytes.
(3-6) SECTION CONTROL
11110000 F0
01000011 43
01111110 7E
00000000 00
0sssssss ss
0ddddddd dd
11110111 F7
g System Software h = 08H-0FH, dd=ON is received, and the Pattern will be converted
into QY700 sections A-H respectively.
(3-7) MIDI TIME CODE(QUARTER FRAME MESSAGE)
STATUS 11110001(F1H)
0nnnxxxx
If MTC is selected as the Timing Clock, MTC Quarter Frame messages will be received.
(3-8) MIDI MACHINE CONTROL
These will be received if MTC is selected as the Timing Clock.
(3-8-1) STOP(MCS)
11110000 F0
01111111 7F
01111111 7F
00000110 06
00000001 01
11110111 F7
Transmitted when the STOP key is pressed.
(3-8-2) DEFERRED PLAY(MCS)
11110000 F0
01111111 7F
01111111 7F
00000110 06
00000001 01
11110111 F7
Transmitted when the RUN key is pressed.
(3-8-3) LOCATE(MCP)
11110000 F0
01111111 7F
01111111 7F
00000110 06
00000001 01
00000110 06
00000001 01
0tthhhhh hr
0cmmmmmm mn
0kssssss sc
0gifffff fr
0bbbbbbb ff
11110111 F7
Transmitted when you move between measures in Song Play mode.
MIDI Data Format
Exclusive status
YAMAHA ID
Style
Section Control
Section
On/Off
End of Exclusive
Exclusive status
RealTime Header
device ID
MMC Command Message
STOP(MCS)
End of Exclusive
Exclusive status
RealTime Header
device ID
MMC Command Message
DEFERRED PLAY(MCS)
End of Exclusive
Exclusive status
RealTime Header
device ID
MMC Command Message
LOCATE(MCP)
Byte Count
"TERGET" Sub Command
standard time specification with sub-frames
End of Exclusive
37