Yamaha MOTIF6 Voice Editor Manual page 15

Voice Edit Window
When editing a voice, you will see the following screen:
1
3
8
!
1 Toolbar
This contains buttons for executing various basic functions in the program. The following four
buttons are available:
• Editor Setup button .........................See
• Library Window button ....................Click this to bring the Library Window back into view.
• Store button.....................................Click this to open the "Store" dialog, where you can name your
• Compare button ..............................If you click this, bulk data for the original voice (prior to editing)
2 VOICE panel
This shows the name and instrument category/sub category of the voice. You can also
rename your edited voice and change the instrument category from the "Voice Category" pull-
down menu.
n
Voice names can consist of up to 10 characters.
3 QUICK EDIT panel
This lets you set the Quick Edit parameters.
n
Parameters to be set differ depending on the selected voice (Normal, Drum or Plug-in). Parameters for
which knobs appear on the window are available for editing.
4 PITCH BEND settings
Use the "LOWER" knob to set the lowest point in the pitch bend wheel's range and the
"UPPER" knob to set the highest point.
Editor Setup button
Library Window button
Store button
2
Compare button
page
edited voice and select a location in which to store it.
will be sent to on your connected instrument. Click it again to
send the bulk data for the edited voice. This button is useful for
making A/B comparisons between the original and edited
voices.
4 5
% $
10.
15
6
7
)
9
@
#