Front Control Panel & Buttons - Samsung WA1150S User Manual

FRONT CONTROL PANEL & BUTTONS
For more details, see control panel of your washing machine.
POWER BUTTON
- Press this button to turn the power on/off.
- The power is automatically turned off after
washing or if not disturbed for 10 minutes.
START/ HOLD BUTTON
- Select this button when you are about to start
washing or wish to pause.
COURSE BUTTON
- Choose the course according to the types and
status of laundry.
- For further details about each course, please
refer to pages 11~16.
SPIN
SPIN BUTTON
- Use this function when you want to spin only or
adjust the spinning time. (1~9 min.)
- Select "1 min. Spin" when you want to prevent
wrinkles during the spin.
- When you select "Spin" only, there will be a
difference between the spinning time and the
remaining time. This is because the remaining
time includes the draining and holding time as
well as the actual spinning time.
SOAK
SOAK BUTTON
- Use this function when you want to perform soak
washing.
- This function will not be selected in the water
cleaning course.
WASH
WASH BUTTON
- Select this function when you want to wash only
or adjust the washing time. (6~30 min.)
RINSE
RINSE BUTTON
- Select this function when you want to rinse only
or change the number of times on rinsing. (Max.
5 times)
POWER
START
HOLD
COURSE
WATER LEVEL
- Water level is automatically indicated, but you
can select the water level by pressing this button
if you want it otherwise.
WATER SUPPLY
- Use this function when choosing between cold or
hot water.
DELAY START
- Use this function when you would like to finish
washing at the time you want.
- Turn the power off in order to cancel the set time.
LEVEL METER
- Adjusts the water inflow to the center by turning
the adjustable legs.
❖ WATER LEVEL/DETERGENT INDICATOR
- According to the amount of laundry, amount of
detergent and water level are automatically
indicated in proportion.
- Indicates the water level in 10 grades.
❖ TIME LEFT/DELAY START/ERROR SIGN
INDICATOR
- Indicates the time left to the end of washing.
- Indicates the lapsed time.
- If anything should go wrong, it indicates error
messages in different circumstances, allowing
you to rectify the problem.
❖ PROCEDURE INDICATOR
- Indicates the stage of washing.
- The next stage is lightened up when it is done
with the current procedure, and the one finished
is automatically turned off. It flickers during the
procedure.
4
WATER
LEVEL
BUTTON
WATER
SUPPLY
BUTTON
DELAY
START
BUTTON