Table of Contents
Advertisement
1) To open the dust cover of the dust bag com-
partment, press the clamper upwards.(The
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag
into its original position.
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
MAINTENANCE OR REPLACEMENT OF THE FILTERS
INLET FILTER
To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust
compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage
may result. After cleaning the secondary filter attach it in place.
SECONDARY FILTER
OUTLET FILTER
1) Open the grille part, separate the
exhausted filter.
NOTE:
The filters must be completely dried before being replaced in the dust compartment.
SECONDARY FILTER
6
REPLACING THE DUST BAG
clamper is located at the front of the dust cover)
2) Remove the dust bag from the cleaner.
4) Press the dust cover down gently until the
clamper relocks.
FOR CLOTH FILTER BAG
2) Reassemble it after cleaning or replacing
the filter in the reverse order.
Advertisement
Table of Contents
