Table of Contents
Advertisement
Recording From TV
TV
AUDIO OUT
VIDEO OUT
AUDIO OUT
VIDEO OUT
1
Turn on the TV. Tune your TV channel.
2
Connect your VCR to the TV by A/V cable as above
figure.
3
Select the recording speed (SP/LP) by pressing the
SPEED button.
4
Hold down the REC ( ) button to start line
recording.
5
Press the STOP ( ) button to end line recording.
Line recording is not available for the TV which
has no A/V OUTPUT JACK.
ANTENNA IN
LINE
LINE
OUT
IN 1
AUDIO
TV
VIDEO
RF OUT
Recording from Another VCR
AUDIO IN
AUDIO
VIDEO IN
VIDEO
RF OUT
1 Turn on the TV.
2 Connect the playback side VCR's A/V cable
to the recording side VCR's video and audio
in (rear panel).
3 Select the recording speed (SP/LP) by
pressing the SPEED button.
4 Begin playback on the playback side VCR
and hold down REC ( ) button.
5 Press the STOP ( ) button to end line
recording.
You can copy a cassette to your VCR from another
video source, such as another VCR.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
If you wish to protect a cassette, break off the tab
using a small screwdriver.
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
ENG-7
ANTENNA IN
VCR
L
H
OUT TO TV
ON
ATT
OFF
ON
TEST
OFF
IN FROM ANT.
LINE
LINE
OUT
IN 1
TV
AUDIO OUT
VIDEO OUT
V IDEO OUT
AUDIO OUT
Advertisement
Table of Contents
