Table of Contents
Advertisement
BN68-448D-03Eng
11/11/03 2:43 AM
Setting the Dolby Digital Surround
English-32
Page 32
The following Dolby surround settings can be adjusted to suit your
personal preferences.
Dolby Pro-Logic II On/Off.
Dynamic range for adjusting the volume Dolby Pro-Logic II
On/Off during night time viewing.
Speaker setting for Dolby Digital surround.
Activation/Deactivation of test tone to simulate the volume
on each speaker.
Volume level control of the each speaker.
Delay time for the rear speakers (0~15ms).
1
Press the MENU button.
Result:
The main menu is displayed.
2
or ❷ button to select Sound.
Press the
Result:
The options available in the Sound group are displayed.
3
Press the ENTER
4
or ❷ button to select Dolby Digital.
Press the
Press the ENTER
Result:
The option available in the Dolby Digital group are
displayed with Dolby Pro-Logic II selected.
5
Press the ENTER
6
Select the option (On or Off) by pressing the
Press the ENTER
You can also select these option(Dolby Pro-Logic II On/Off) by
simply pressing the SURROUND button on the remote control.
For further details of output depending on each option, refer to
34 page.
7
or ❷ button to select Dynamic Range.
Press the
Press the ENTER
If you wish to adjust the volume for nighttime viewing, select Off by
or ❷ button.
pressing the
8
Press the ENTER
9
or ❷ button to select Speaker Setting.
Press the
Press the ENTER
Result:
The options available in the Speaker Setting group are
displayed with front left selected.
10
Select the speaker (Front Left, Center, Front Right, Rear Right,
Rear Left, Sub Woofer) to be adjusted by pressing the
or ❷ button.
Press the ENTER
When 'Front Left/Right' is set to 'Large' on the Speaker Setting menu, the
sub woofer is automatically turned off.
If the sub woofer is switched on, 'Front Left/Right' is automatically set to
'Small'.
or ❿ button.
or ❿ button.
or ❿ button.
or ❷ button.
or ❿ button.
or ❿ button.
or ❿ button.
or ❿ button.
or ❿ button.
Advertisement
Table of Contents
