Using The Feature (Uk Only) - Samsung UW21J10VD Owner's Instructions Manual

Using the
Before presetting your VCR unit:
◆ Check that the language, date and time are correct
(if the clock has not been set, the Date/Time Setting
function is activated automatically)
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the VIDEOPLUS button.
Result: A message is displayed to allow you to enter the
VIDEO PLUS code.
☛
If there is no VIDEOPLUS button on your remote control,
the VIDEOPLUS feature is not available on your model. If all
six programmes have been set, the list of preset recordings
is displayed to enable you to modify an existing recording or
clear one that you no longer require. Refer to page 51 for
further details.
2
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the VIDEOPLUS code that you are
entering:
◆ Press the œ button until the digit to be corrected is
cleared
◆ Enter the correct digit
3
Press the MENU button.
Result: The Timer Record is selected.
Press the œ or √ button again.
4
☛
When you finish the inputting VIDEOPLUS code, the Timer
Record program will be set automatically. At this moment,
the current channel is set for the recording. t time with
stored stations, the programme number flashes. When
using the VIDEOPLUS function, you can change the
programme number with the † or ... buttons.
Press the † or ... button to select Start, and tnen press the œ or
5
√ button. Modify the start time by pressing the † or ... button.
➢
When entering the date and time, all single digits must be
preceded by a zero.
Example: 7:30 am
Enter 07:30
6 Press the † or ... button to select Stop. Modify the stop time in
the same way.
Feature
TM
(UK Only)
VCR PLUS
CODE - - - - - - - - -
0-9 Code Correct
VCR Menu
PR. P 1
Start 22 : 00
Stop 23 : 00
Date 30 / 04 / 2003
Mode Once
Decoder Off
Speed SP
PDC Off
Select Adjust Exit
VCR Menu
PR. P 1
Start 22 : 00
Stop 23 : 00
Date 30 / 04 / 2003
Mode Once
Decoder Off
Speed SP
PDC Off
Select Adjust Exit
VCR Menu
PR. P 1
Start 22 : 00
Stop 23 : 00
Date 30 / 04 / 2003
Mode Once
Decoder Off
Speed SP
PDC Off
Select Adjust Exit
49
ENG
End