Alarm (Menu 5.4); Calculator (Menu 5.5) - Samsung SGH-S200 Manual

Tri band gprs telephone
Hide thumbs Also See for SGH-S200:
Table of Contents

Advertisement

Organiser
Alarm
(Menu 5.4)
This feature allows you to:
• Set the alarm to ring at a specific time
• Set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable)
The following options are available.
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up in
the morning.
To set the alarm, proceed as follows.
1. Choose the type of alarm to be set.
2. Enter the required time and day of the week, if
applicable.
3. Press the OK soft key.
4. If you select Morning Call in Step 1, select the
repeat option: Monday to Friday or Monday
to Saturday.
Remove Alarm: deactivates all alarm settings.
Autopower: if this option is set to Enable, the
alarm will ring at the specified time, even when the
phone is switched off.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm will
not ring.
98
To stop the alarm when it rings, open the phone
and press the Exit soft key.
When setting or viewing an alarm, the following
options are available when you press the Options
soft key.
Remove Alarm: allows you to deactivate the
current alarm.
Alarm Sound Set: allows you to select the alarm
melody.
Calculator
(Menu 5.5)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required
arithmetic symbol appears: + (add),
– (subtract), * (multiply), / (divide).
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
Notes:
• To erase any mistakes and clear the display,
press the
key.
• To include a decimal point or a bracket, press the
left soft key until the required symbol is
displayed.
5. To calculate the result, press the
Organiser
key.
99

Advertisement

Table of Contents
loading

Table of Contents