Selecting a Stored Station
You can listen to a stored radio station as follows:
1
Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER (BAND) on remote control.
3
Select the required frequency band by pressing TUNER (BAND) on
the remote control or TUNER (BAND) again on the front panel.
4
Press the TUNING MODE button on the front panel of the unit, or the
TUNING MODE button on the remote control until "PRESET" is
displayed.
5
Turning MULTI JOG on the front panel left or right until the desired
station is found or press
/
or
Select the desired station by pressing the station number stored,
using the TUNING
or
button on the remote control.
Result: The desired station is now received.
1
5
to select the desired station.
2,3
4
5
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
GB
19