Samsung DVD-VR300 Instruction Manual page 69

Press the OK button.
3
• The information concerning the programme is
displayed.
• When using the G-Code function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
❷
buttons.
DVD-RAM(VR)
No
To PR No.01
01
To DVD
02
Day TUE 13
03
04 08 : 20
Start
05
SP
Speed
06
DVD-RAM(VR)
TUE 13
Refer to the following page if:
• The programme number or times flash
• You wish to modify the programme
If the programme and times are correct, press
4
the OK button.
Press the STANDBY/ON button to activate the
5
timer.
Refer to page 73~74 if you wish to:
6
• Check that your DVD Recorder-VCR has been
programmed correctly
• Cancel a preset recording
Scheduled Record List
End Speed V/P Edit
Start
PR
01
10 : 20
End
Scheduled Record List
08:20 10:20
The numbers next to each TV programme list-
ing are G-Code numbers, which allow you to
Note
programme your DVD Recorder-VCR instant-
ly with the remote control. Tap in the G-Code
for the programme you wish to record.
™ G-Code is a trademark of Gemstar
Development Corporation. The G-Code
system is manufactured under licence from
Gemstar Development Corporation.
English - 69