Choosing A Connection - Samsung DVD-M108/XTL Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for more information
on those particular components.
Connection to an Audio System
Method 1 Method 2
2ch Amplifier
Audio Input Jacks
R L
MIXED AUDIO OUT
R L
Mixed Audio Out
AUDIO
Dolby Digital Decoder
Digital Audio Input Jacks
OR
DVD
Digital Audio Out
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Good picture
Basic Audio
TV
AV Cable
DVD
R
L
Audio Output Jacks Video Output Jack S-Video Jack
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3 DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
NOTE
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
Choosing a Connection
Method 2 Method 3
Better picture Best picture
S-Video
Video Cables
Cable
OR OR
Component Video
Jacks