Table of Contents
Advertisement
Dolby Pro Logic II decoder
GB
REC
TV/VCR
SPEAKER
TEST
SOUND MODE SOUND EFFECT
ANGLE
TITLE
SUBTITLE
DISC MENU
1
SPEED
TIMER
REPEAT
MARK
INDEX
REC
TV/VCR
SPEAKER
TEST
SOUND MODE SOUND EFFECT
ANGLE
TITLE
SUBTITLE
DISC MENU
2
SPEED
TIMER
REPEAT
MARK
INDEX
64
Dolby Pro Logic II is a new format for playing multichannel audio
signals that offers improvement over conventional Dolby Pro Logic.
It can be used to decode not only sources recorded in Dolby
Surround, but also regular stereo sources into five channels (front
left/right, center and surround left/right). In addition, various
parameters can be set according to the type of source and contents,
so you can adjust the sound field with greater precision.
Select the source you want to use. (CD, Video, Input (LINE1,
LINE2, LINE3, TV CH))
1
Press the SOUND MODE button.
• Press the SOUND MODE button repeatedly to select Dolby Pro
Logic II.
2
Press the SOUND EFFECT button.
• Each time you press the button, the sound effect changes as
follows.
3
Select the desired mode ("MATRIX", "MOVIE" or "MUSIC").
• Matrix: Use when playing sources recorded in monaural.
• Movie: Use this when viewing movies.
• Music: Use this mainly for music listening.
Dolby Pro Logic II may not be selected depending on the
disc used. (DTS DVD, Dolby Digital 5.1, VCD, MP3)
When playing a DVD recorded in 2-channel Dolby Digital,
it will automatically be output in Dolby Pro Logic II.
Dolby Pro Logic II operates only when CD, VIDEO or
INPUT (LINE1, LINE2, LINE3 or TV Broadcast) is selected.
Mode, Sound Effect cannot be selected while the DVD
signal is being input.
SOUND mode/effect function
This feature simulates the sound of different acoustic spaces.
1
Press the SOUND MODE button.
• Each time you press the button,
the sound mode changes as
follows.
• The SOUND mode adds a coustic
surround effect during playback of
stereo analog or linear PCM digital
signals.
2
Press the SOUND EFFECT button.
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
alternates between STEREO and 4 STEREO.
• When in 4 STEREO mode, you'll hear equal output from
the front and rear speakers.
Dolby Pro Logic II
ON
OFF
Mode
PL II
STEREO
NATURAL
Source
Video Tape
TV
LINE 3
The Sound mode and effects do not Work With Dolby Digital, DTS, MP3, VCD, LPCM
disc.
Dolby Digital, DTS : 5.1-Channel speaker output
VCD, MP3, LPCM : Outputs to the front left, right, and subwoofer speakers only.
During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.
REC
TV/VCR
PL II [PL II]
SPEAKER
TEST
SOUND MODE SOUND EFFECT
NAT [NATURAL]
ANGLE
TITLE
SUBTITLE
DISC MENU
1
SPEED
TIMER
REPEAT
JAZZ [JAZZ]
INDEX
CON [CONCERT]
STA [STADIUM]
REC
SPEAKER
TEST
SOUND MODE SOUND EFFECT
ANGLE
TITLE
SUBTITLE
DISC MENU
2
SPEED
TIMER
REPEAT
: 5.1ch
: STEREO
JAZZ
CONCERT
STADIUM
65
GB
MARK
TV/VCR
MARK
INDEX
Advertisement
Table of Contents
