Table of Contents
Advertisement
VCR
Selecting the Colour Mode
GB
MAIN MENU
USER SET
RETURN
➛ ❿
ENTER
❷
USER SET
AUTO
COLOUR SYSTEM
:AUTO
PAL
NICAM
:ON
MESECAM
IPC
:ON
B/W
AUTO POWER OFF
:OFF
➛ ❿
RETURN
❷
VCR
NICAM
MAIN MENU
USER SET
RETURN
➛ ❿
ENTER
❷
USER SET
COLOUR SYSTEM
:AUTO
ON
NICAM
:ON
OFF
IPC
:ON
AUTO POWER OFF
:OFF
➛ ❿
RETURN
❷
24
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press MENU on the remote control.
Result:
The MAIN MENU is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
❷
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
❷
SYSTEM
option is selected.
5
Press the ❿ button to select
AUTO
PAL
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W
Black and White
6
On completion, press RETURN twice to exit the menu.
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 35.
1
Press MENU on the remote control.
Result:
The MAIN MENU is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
❷
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
menu is displayed.
USER SET
4
Press the corresponding
or
buttons, until the
❷
is selected.
5
Press ➛ or ❿, until...
To...
Mono mode
OFF
is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
is displayed.
ON
ON: Normally set at this position.
6
On completion, press RETURN twice to exit the menu.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result:
2
Press the corresponding
USER SET
3
Press the ENTER button to select this option.
Result:
4
Press the corresponding
selected.
5
Press the ❿ button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
COLOUR
IPC mode
7
Press the ➛ or ❿ buttons until the picture is displayed according to
MESECAM
B/W
.
your preferences.
If you do not press a button within ten seconds, the
PICTURE
8
On completion, press the RETURN button.
NICAM
option
The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
,
❷
option.
The
menu is displayed.
USER SET
or
buttons, until the
IPC
option is
❷
ON
, the sharpness
button to turn the
❷
OFF
.
menu disappears automatically.
VCR
GB
MAIN MENU
USER SET
RETURN
➛ ❿
ENTER
❷
USER SET
COLOUR SYSTEM
:AUTO
NICAM
:ON
ON
IPC
:ON
AUTO POWER OFF
:OFF
OFF
➛ ❿
RETURN
❷
25
Advertisement
Table of Contents
