Samsung AWT18P1HBA Owner's Instructions Manual page 15

AWT18P1HBA_E_17027 2/4/04 2:23 PM
4 Remove the chassis from the cabinet.
5 Remove the rubber cap inserted into the basepan.
6
Fix the drain pan as shown in the figure, and then connect the drain hose.
(You can use any commercially-available drain hose.)
7
Install the cabinet at the specified area after installing the drain pan,
and then re-assemble it in the original condition.
❇
When assembling the front panel be sure to fix with a supplied screw.
(TH 2S 4X10)
N
In the case of an area where the drain pan can be directly installed
on the rear side of the unit after installing the air conditioner.
1 Follow steps 5 and 6 only.
Page 15
Drain Pan
Rear
Rubber cap
Screw
Drain Hose
Bottom-Side View with
Drain Pan and Hose in Place
Screw
15
E-