Selecting Energy Saving Mode (Only ✴✴✴✴F3/A3/G3✴✴✴ Models); Operating Recommendation; Temperature And Humidity Ranges - Samsung AW07A0NEB Owner's Instructions Manual

Selecting Energy Saving Mode

Operating Recommendation

Temperature and Humidity Ranges

The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mode
Cooling
If the air conditioner is used at...
Higher temperature
Lower temperature
Higher humidity levels
8
E-
If you wish to save energy when using the air conditioner,
select the energy saving mode by using the Energy Saver switch.
This feature is normally used when the room is unoccupied.
1 To select the energy saving mode, set the Energy Saver switch to the ON
position.
Result: The fan and compressor cycle on and off simultaneously.
This results in wider variations of room temperature and humidity.
➢
If you want to run the air conditioner in Fan mode, do not turn the
Energy Saver switch on. The Fan mode will not operate when the
Energy Saver switch is in the ON position.
2
To turn off the energy saving feature, set the Energy Saver switch to the
OFF position.
Result: The fan runs at all times, while the compressor cycles on and off.
Here is a recommendation that you should follow when using your
air conditioner.
Topic Recommendation
Power failure If a power failure occurs when the air conditioner is
operating, the unit is switched off. When the power returns,
the air conditioner starts up again automatically.
Indoor Temperature Outdoor Temperature
21°C to 32°C approx. 21°C to 43°C approx.
21°C to 54°C approx.(Middle East)
Then...
The automatic protection feature may be triggered
and the air conditioner stopped.
A water leakage or some other malfunction may happen
if the heat exchanger freezes.
Water may condense on and drip from the surface of the unit
if it is used for long periods.
(Only ✴✴✴✴F3/A3/G3✴✴✴ models)
Indoor Humidity
80% or less