Show Call Charges; Show Call Timers - Motorola P7389 User Manual

Hide thumbs Also See for P7389:
Table of Contents

Advertisement

Show Call Charges

This feature allows you to display the cost of your calls or the
amount of credit remaining. The figures are in phone units or
currency depending on the setting of the Set Charge Type
option.
Show Call Charges is only available if you receive the Advice
of Charge service.
Show Last Call
Press
. Select the Quick Access feature or after the
tone, say the Voice Tag name.
Displays the cost of your last chargeable call.
Total For All Calls
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using the 'Reset Call Charges' option.
Credit Remaining
Press
. Select the Quick Access feature or after the
tone, say the Voice Tag name.
Displays the difference between your total call costs and the limit
specified by the 'Set Total Charge Limit' option. If there is no
limit, No Charge Limit Set will be displayed.
84
Using the Options Menu

Show Call Timers

This feature allows you to display the duration of your calls and
to reset your time meters to zero.
If you receive the Advice of Charge service then all calls are
timed. If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
Show Last Call
Press
. Select the Quick Access feature or after the
tone, say the Voice Tag name.
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the 'Reset All Timers' option.
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
Set Audible Call Timers
j
Your phone provides two programmable audible call timers:
• The 'Single Alert Timer' will sound a beep just once during a
call, after a preset time has elapsed.
• The 'Repetitive Timer' will sound regular beeps during a call,
at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L-series +

Table of Contents