Uiet Alk (Qt)/ D Igital Uiet Alk (Dqt) S Ettings - Kenwood TK-2200L Instruction Manual

Q t (Qt)/ d
uiet Alk
To change the QT/DQT settings of a channel:
1
Release the PTT switch and Side 1 key.
The transceiver announces Channel.
2
Pressing the Side 1 key or Side 2 key will toggle between QT,
DQT, and Channel setup.
3
4
26
Q
igitAl uiet
With the transceiver power OFF, press
and hold the PTT switch and Side 1 key
while turning the transceiver power ON.
Continue to hold the PTT switch and
1
Side 1 key until the LED lights orange
and the transceiver announces "Self".
Press the Side 1 key or Side 2 key to
select QT or DQT setup.
The transceiver announces "QT" or
"DQT", depending on your selection.
Press and release the PTT switch, then
rotate the Channel selector to your
desired channel.
Upon releasing the PTT switch, the
1
transceiver announces "QT One" or
"DQT One", depending on your selection.
t (dQt) S
Alk ettingS