How Do I Switch Control Modes - Kenwood KRF-X9995D User Manual

How Do I Switch Control Modes?

How Do I Switch Control Modes?
You can use PowerTouch to operate your receiver and source devices from
2 different zones. To do so, you need to switch control modes to control
the devices from each zone.
To make operations from Zone B easier, we recommend that you pur-
chase a second PowerTouch. That way you can leave one PowerTouch in
Zone A that is always set up for Zone A operation, and another PowerTouch
in Zone B that is always set up for Zone B operation.
Some system control features are not available when the PowerTouch is
set up for multi-zone control.
To switch control modes for Zone A or Zone B:
1. Touch (SETUP) on the Quick Access menu to access the Setup
menu.
2. Touch
3. Touch
4. Touch
which can be controlled currently are indicated by highlighting.
• Zone A controls devices connected for Zone A.
• Zone B controls devices connected for Zone B.
to access multi-zone commands:
to highlight it.
for Zone A or touch for Zone B. The buttons
91