Kenwood KR-V999D Instruction Manual page 45

3
Select where the macro should be stored.
4
Press the keys to be operated in order.
1 Press TV > SHIFT > POWER to
EXAMPLE:
TV
2 Press FUNCTION SHIFT > "4" (TV/
FUNCTION
SHIFT
3 Press VIDEO twice to select the
4 Press SHIFT and POWER to turn
5
Terminate the macro program mode.
Press the VIDEO, AUDIO, or TV
key to select the macro location.
(MACRO1, 2, and 3 respectively)
AUDIO
VIDEO TV
turn on the TV.
SHIFT
\ \ \
ER
SAT./VIDEO) to set the TV to the
appropriate video input.
TV/SAT./VID
\
4
LD player registered at VIDEO 2.
VIDEO
on the LD player.
SHIFT
\ \
ER
Press the MACRO key so that the
backlight flashes twice.
MACRO
Getting the most from your remote control
• You can store up to 3 different macros, one at each key:
VIDEO = "MACRO 1", AUDIO = "MACRO 2", TV = "MACRO 3"
• The backlight flashes once when you select the macro location.
• Pressing a button other than VIDEO, AUDIO, or TV cancels the macro
program mode.
When VIDEO is pressed
MACRO 1
SP. A
ROOM A
• This example shows you how to create a macro that: turns on the TV,
sets the TV to the appropriate input, selects the receiver's input
selector to LD, and turns on the LD player. All you have to do is insert
the laser disc!
• In order to allow verification of the remote control mode, the name of
the selected input appears in the receiver's display when the VIDEO,
AUDIO or TV key is pressed. When the VIDEO or AUDIO key is
pressed the receiver's input also changes.
• The macro is stored at the locations specified in step 3. If another
macro was previously stored at the same location, it is erased.
Repeat steps 1 through 5 to program up to 3 macros.
KR-V999D (En/T)
4 5