Db (Sound Coordinate); Clock Display; Adjusting Time - Kenwood KRC-165 Instruction Manual

General features
"FD": Adjust the fader level.
Setting values: Rear 15 - Front 15

dB (Sound Coordinate)

You can recall the best audio setting preset for different types
of the music.
1
Press the AUD button to enter the Sound Coordinate mode.
2
Press a preset button (#1-5).
The preset settings of the bass and treble tones are recalled.
#1: Flat (dB-1)
#2: Rock (dB-2)
#3: Pops/Top 40 (dB-3)
#4: Jazz (dB-4)
#5: Easy (dB-5)
3
Press the AUD button to end the sound coordinate mode.
NOTE
You can call the following settings with this function; bass center
frequency, bass level, bass quality factor, bass extension, treble
center frequency, and treble level setting.

Clock display

Turning clock display On/Off:
Each time you press the CLK button, the display switches
between the clock and each mode display.

Adjusting Time

Adjust the time.
1
When the time is not displayed, first press the CLK button to
display the time.
2
Press the CLK button for at least two seconds to enter the
clock adjustment mode. The time display will blink.
3
• Adjusting the hours
Press the BAND button to advance the hours.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
4
Press the CLK button to end the clock adjustment mode.
— 6 —