Loading Compact Discs - Kenwood KDC-CMP21V Instruction Manual

Loading compact discs

1
Make sure the disc magazine is the right way up
with the "disc" logo on the top. Pull the tray out by
the projection.
2
Tray
Place the disc on the tray with the label facing
upwards. Insert the tray into the disc magazine until
it locks. Check that the discs and trays are inserted
properly. The discs are numbered from the bottom
from 1 to 10.
• Take care to insert trays into the correct grooves in the
disc magazine and to insert discs properly into the tray
grooves. Otherwise malfunction may occur or the disc
may be damaged.
• Insert all trays even when some of them do not carry
discs. Otherwire malfunction or operation failure may
occur.
• 8-cm discs cannot be used. If an 8-cm disc adapter is
used, the disc cannot be ejected.
3
Open the CD changer door.
6
|
English
Projection
4
Insert the magazine into the CD changer until it
clicks.
5
Close the CD changer door.
• Use the CD changer with its door closed to prevent the
entry of dust into the changer.
6
Magazine ejection
"0" (EJECT)
Open the CD changer door, and press the
"0"(EJECT) button.
• Be sure to open the door completely before pressing the
"0"(EJECT) button. If the door is not completely open,
the magazine may hit the door and cause damage of
malfunction.