APPENDIX
To connect to a network, make sure the proper
network settings are configured for DWL-520+.
For
Microsoft Windows XP:
Go to Start > right click on
My Network Places
select Properties > Double-click on
the Network Connection associated
with the DWL-520+.
Click
Internet Protocol (TCP/IP)
Select
Obtain an IP address
automatically
Access Point has DHCP server enabled)
Select
address automatically
Setup for wireless router or Access Point
using
Static IP
address.
Select
Use the following IP address
the Wireless Router or Access Point does
not have DHCP server enabled
Input a static IP address on the same network, which
will correspond with the Wireless Router or Access
Point.
Your Internet service provider provides
preferred DNS server information.
>
Click
Properties
(if the Wireless Router or
Obtain DNS server
Click
IP address:
192.168.0.51
Subnet mask:
255.255.255.0
OK
(if
Click
OK