D-Link DWL-520 Quick Installation Manual page 9

For Windows 2000 users:
Go to Start > Settings
Connections > Double-click on the
Connection associated with the DWL-520+ >
select Properties
Click Internet Protocol (TCP/IP)
Setup for wireless router or Access Point
using DHCP server.
Select Obtain an IP address
automatically (if the Wireless Router or
Access Point has DHCP server enabled)
Select
address automatically
Setup for wireless router or Access Point
using Static IP address.
Select Use the following IP address
the Wireless Router or Access Point does
not have DHCP server enabled
Input a static IP address on the same network,
which will correspond with the Wireless Router
or Access Point.
IP address:
Subnet mask:
Your Internet service provider
provides preferred DNS server
information.
> Network and Dial-up
Click Properties
Obtain DNS server
Click
192.168.0.51
255.255.255.0
Click
Local Area
OK
(if
OK