Connecting An Antenna Or Cable Tv (No Box) - Insignia NS-32L120A13 User Manual

Insignia 32"/46" LCD TV

Connecting an antenna or cable TV (no box)

To connect an antenna or cable TV (no box):
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect a coaxial cable to the ANT/CABLE IN
jack on the side of your TV and to the antenna or
cable TV wall jack.
NS-32L120A13/NS-32L240A13
Antenna or
cable TV (no box)
Coaxial cable
NS-46L240A13
Antenna or
cable TV (no box)
Coaxial cable
3 Plug your TV's power cord into a power outlet,
then turn on your TV.
4 Go through the Setup Wizard on page 26.
Side of TV
USB
COMPONENT
IN
P
R
R
P
AUDIO
B
L
AV IN Y
DIGITAL VIDEO
OUTPUT
(COAXIAL)
HDMI 2
(ARC)
HDMI 1
(DVI)
ANT/
CABLE IN
Side of TV
USB
COMPON ENT
IN
P
R
R
AUDIO P
B
L
AV IN Y
DIGITAL VIDEO
OUTPUT
(COAXIAL)
HDMI 3
HDMI 2
(ARC)
HDMI 1
(DVI)
ANT/
CABLE IN
www.insigniaproducts.com
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
• If the signal level for a channel is weak, the
picture may be distorted. Adjust the antenna or
use a highly directional outdoor or set-top
antenna with a built-in amplifier.
• If the picture quality is good on some channels
and poor on others, the problem may be caused
by a poor or weak signal from the broadcaster
or cable TV provider.
• If you connect to cable or satellite TV without a
set-top box and experience poor picture quality,
you may need to install a set-top box to improve
signal reception and picture quality. Contact
your cable or satellite TV provider about
upgrading to a set-top box.
• Many high-definition (HD) channels upscale
standard-definition (SD) content. The picture
displayed on your TV is still displayed as SD, thus
the picture quality will not be as clear or crisp as
it would be if the content was originally
recorded in HD.
15