VTech Magic Paws User Manual page 6

4. Press one of the FOOT PRESS BUTTONS
to hear either "Koochy coo" or a giggle
sound effect. The LIGHT-UP PAWS will
flash according to which foot was pressed.
5. Gently shake the bear to hear "Weee!" or
random melodies. The LIGHT-UP PAWS
will flash with the sound.
6. Gently shake the bear while a melody is
playing to hear "Weee!" play on top of the
melody.
7. The VTech
seconds without input. The unit can be re-activated by the sound
sensor. When any background noise is detected, you will hear "Grrr!",
"Bear Hug!" The LIGHT-UP PAWS will flash with the sound.
SOOTHING MODE
1. Turn on the unit by sliding the PLAYTIME/
OFF/SOOTHING MODE SELECTOR
SWITCH to the SOOTHIING MODE (
You will hear "Shhhh, be beary beary
quiet!" followed by a short tune. The
LIGHT-UP PAWS will flash with the sound.
®
Magic Paws™ will automatically shut-off after several
"Koochy coo"
"Weee!"
"Weee!"
Shhh...
).
6