Included In This Package; Getting Started; Battery Installation; Battery Notice - VTech Learn & Discover Driver User Manual

INCLUDED IN THIS PACKAGE

• One VTech
• One instruction manual
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child's safety.

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
the screw.
3. Install 2 new "AA" (UM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries
is recommended for maximum
performance.
4. Replace the battery cover and tighten
the screw to secure the battery cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity ( +, - ) signs to
avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
®
Learn and Discover Driver™ learning toy
3