Installation Guide
In case of difficulty
Heat pump
• Check Function 2: Heat Pump Changeover Valve to make sure it is
issues cool air
in heat mode,
or warm air in
cool mode
Heating and
• Check Function 1: System Type to make sure it is set to match your
cooling equip-
ment running at
• Grasp and pull thermostat away from wallplate. Check to make sure bare
the same time
(or heat does
not turn off)
Heating system
• Check Function 1: System Type to make sure it is set to match your
is running in
cool mode
properly configured for your system (see page 18).
heating and cooling equipment (see page 17).
wires are not touching each other (see page 12).
heating and cooling equipment (see page 17).
24