Seal Base Bracket - Honeywell H8908ASPST - Manual Humidistat Control Installation Instructions Manual

4. Remove the base bracket from the humidistat. For
duct mount, slide the black gasket onto the base
bracket. See Fig. 8.
NOTE: Use gasket only when mounting the control to
ductwork. Leave off when mounting to a wall.
Fig. 8. Seal base bracket.
5. Secure the base bracket to the duct or remote loca-
tion. Secure to the duct with four 1-in. (25 mm)
screws (provided) or to the wall with two 1-in. (25
mm) screws (provided).
Fig. 9. Mount base bracket to duct or remote location.
H8908A/B HUMIDISTAT H8908C/D DEHUMIDISTAT
M24733
M24722
3 69-1341EF—01