Honeywell H8908A/B Installation Instructions Manual

H8908A/B Humidistat;
H8908C/D Dehumidistat
APPLICATION
The H8908 family of low-voltage humidistats/
dehumidistats provide accurate control of whole house
humidifiers, dehumidifiers, and ventilators. They have a
snap-acting, dust-proof SPST switch and can be
mounted to a duct or wall.
Before Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazard-
ous condition.
2. Check the ratings given in the instructions and on
the product to make sure the product is suitable for
your application.
3. Installer must be a trained, experienced service
technician.
CAUTION
Personal Injury Hazard.
Power supply can cause electrical shock.
Disconnect power supply before beginning
installation.
NOTE: The H8908 electrical connections are not
shared with the thermostat.
INSTALLATION INSTRUCTIONS
Fig. 1. H8908A,D control.
HOLE FOR WIRING
THE DUCT MOUNTING
INSTALLATIONS
Fig. 2. H8908B,C control.
Place Bar Code Here
M24726
CASE REMOVAL
SLOT
M13371
69-1341EF-07