Bush A322D Instruction Manual page 40

Streaming Media Playing System.
When connecting/removing the USB device
1. Press SOURCE on the remote control unit to select USB option.
2.Insert USB equipment into corresponding USB interface 2s after starting the system.
3. After entering the system menu, press
select the require USB equipment press "OK" button to confirm the selection and
enter the interface .
/
4. Press to change pages
unit to select the required file, press OK button to enter the selected file.
5. To exit the streaming media playing system and watch a TV program, you must
press"BACK" button to return to the streaming media main menu at first(to protect
equipment), and then press SOURCE to select TV to return to the TV mode.
Notes:
1. Under source of US , when press button MENU screen goes black, except when B
images or movies are being played.
When playing images , please press button P.
When playing movies, please press button P. Mode and S. Mode to adjust picture
characters..
When playing music, you could press button S. Mode to adjust sound mode.
2.While playing the USB ,press "BACK"button repeatly, the screen picture will return to
USB main interface, and only at this time you can switch corresponding signal
sources by pressing "SOURCE" again.
3. Please do not turn off the TV or unplug the USB device when the connected USB
storage device is working.When such device is suddenly separated or unplugged,
the stored files or the USB storage device may be damaged.
P.39
/
on the remote control unit to
/
then press on the remote control
,
M ode to adjust picture mode .