Dell PowerEdge C5220 Using Instructions page 30

Table 1-18. Network
Item
Use the following IP
address
IP Address
Subnet Mask
Default Gateway
Obtain DNS IP address
automatically
Use the following DNS IP
address
Primary DNS Server
Secondary DNS Server
Enable DNS Register BMC
Host Name
DNS BMC Host Name
Enable DNS Domain
Name (use DHCP)
DNS Domain Name
Save Button
NOTE:
If you configure the IP address with a static IP, you can't get the DNS IP
address from the DHCP server.
NOTE:
If you want to update the DNS information with the DNS server, you must
select "Obtain an IP address automatically" to get IP address dynamically. And the
DNS server IP will provide by the DHCP server.
30
Description
This option allows you to configure a static IP. The IP Address,
Subnet Mask, and Gateway fields become editable when this
option is selected.
This field allows you to set the BMC's IP address.
This field allows you to set the Subnet Mask.
This field allows you to set the BMC's Gateway access address.
This option allows the DNS IP to be configured by a DHCP
server (dynamically).
This option allows you to configure the DNS IP address with a
static IP. The Primary and Secondary DNS Server will become
editable when this option is selected.
Specify the IP address of the preferred DNS server.
Specify the alternative IP address to be used when the preferred
DNS server is not available.
When checked, it will register with the Domain Name Server.
DNS BMC Host Name field will become read-only when this
option is selected.
Specifies the DNS BMC host name.
Enable / disable acquisition of DNS Domain Name from DHCP
server. DNS Domain Name field will become read-only when this
option is selected.
Specified the DNS domain name.
Use this button to save your settings.