Removing A Memory Module - Dell PowerEdge C5220 Hardware Owner's Manual

Supported Memory
Configura- Memory Type/Size
tion
12 sled DDR3 ECC
UDIMM/4096 MB*2
12 sled DDR3 ECC
UDIMM/2048
MB*2+4096 MB*2
12 sled DDR3 ECC
UDIMM/4096 MB*4

Removing a Memory Module

WARNING:
has been powered down. Allow time for the memory modules to cool before
handling them. Handle the memory modules by the card edges and avoid touching
the components on the memory module.
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the system. See "Sled Configuration" on page 51.
2 Push the locking latches of the DIMM slot outwards. See Figure 3-5.
3 Remove the memory module from the system.
56
Installing System Components
CPU DIMMs Type
1 2 VLP
UDIMM
1 4 VLP
UDIMM
1 4 VLP
UDIMM
The memory modules are hot to touch for some time after the system
Many repairs may only be done by a certified service technician. You
Memory Rank Type
Speed (x8, x4)
(MHz)
1333 2R x8
1333 2R x8
1333 2R x8
Component Total DIMM Slot
Density Size
A1 A2 A3
2Gb 8G •
1Gb/2Gb 12G 2G 4G 2G 2G
2Gb 16G • •
A4
•
• •