Advertisement
ASSEMBLY (Continued)
5.
Trim the plastic firewall cover to fit with the strut tower brace and install. Slide and bolt the wiper shaft
6. Check for any interference with the wiring, throttle cable, transmission kick down cable, and hoses.
It may be necessary to periodically tighten the strut tower hardware. This Strut Tower Brace
can be complemented with other Edelbrock Suspension components and Edelbrock IAS
Shocks and Struts. Check with your retailer.
©2001 Edelbrock Corporation
e. Replace the plastic cowl cover be sure to reconnect the washer fluid line, install the hood
appropriate location. Fasten the fuse block in its bracket and bolt small fuse
PN
Qty.
25-4049
22-5224
Edelbrock Corporation
Torrance, CA 90503
Tech Line: (800) 416-8628
E-Mail: Edelbrock@edelbrock.com
PARTS LIST
Description
1
Strut Tower Brace Assembly
1
Installation Kit
2700 California St.
Rev. 6/01
Advertisement
