Answering Calls; Wait/Pause Feature - AT&T Quickfire User Manual

ANSWERING CALLS

1.
When your Quickfire rings or vibrates, tap
Key to answer the incoming call. (Depending on your phone's
settings, you may also answer incoming calls by opening the phone
or by pressing any digit key.)
To ignore incoming calls, tap

WAIT/PAUSE FEATURE

Pauses are used for automated systems (i.e., voicemail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1.
To insert a wait/pause, enter a phone number then press and hold
the * button
until "P" appears.
• Type "P": When you call automated systems (like banking services), you are
often required to enter a password or account number. Instead of
manually entering the numbers each time.
• Type "T": A two second pause stops the calling sequence for two seconds
and then automatically sends the remaining digits.
2.
Call
Tap to dial.
BASIC FUNCTIONS
Ignore or press the END Key
until "T" appears, or press and hold the # button
Answer or press the SEND
.
31 31