Panasonic PT-VW330U Operating Instructions Manual page 68

Troubleshooting
Problem
Picture from a HDMI
device does not
appear or picture is
not stable.
No sound is output
from a HDMI device.
The image is
distorted or runs off.
Note
If the problem persists, after confirming the contents of the table, please consult your dealer.
z
68
- ENGLISH
Is the HDMI cable securely connected?
z
Turn off the power of the projector and the connected devices. Then turn
z
the power of the projector and the connected devices back on.
Isn't unsupported signal cable connected?
z
Set the sound channel of the attached device to Linear PCM.
z
If no audio signal is output during HDMI cable connection, connect the
z
audio cable to AUDIO IN terminals.
Check [PC adj.] or [Screen] and adjust them.
z
Cause
Reference
page
25
—
74
—
—
42/48