Time Zone; Imprinting The Date On Images - Nikon CoolPix S3300 Reference Manual

Press K.
• The time zone selection screen is displayed.
Press J or K to choose the travel destination

time zone.

• Press H in a time zone where daylight saving is in
effect to enable the daylight saving time function and
automatically advance the time by one hour. The W
icon will be displayed at the top of the monitor. Press
I to disable the daylight saving time function.
• Press the k button to choose the travel destination
time zone.
• While the travel destination time zone is selected, the
Z icon will be displayed in the monitor when the
camera is in shooting mode.
C
w Home Time Zone
• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2 and perform the same
procedure as for x Travel destination to set the home time zone.
C
Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
C

Imprinting the Date on Images

Enable the Print date option (E55) in the setup menu after the date and time have been set.
When the Print date option is enabled, images will be recorded with shooting date imprinted on
them.
The Setup Menu
Time zone
London, Casablanca
1 5 / 0 5 / 2 0 1 2 1 5 :3 0
Home time zone
Travel destination
1 0 : 3 0 – 0 5 : 0 0
EDT:
New York
Toronto
Lima
Back
Time zone
EDT:New York
Toronto, Lima
1 5 / 0 5 / 2 0 1 2 1 0 :3 0
Home time zone
Travel destination
E51