Mitsubishi WD385U-EST User Manual page 41

Advanced display utilities (continued)
Important:
• Virtual display function is only supported by
Windows XP.
• To project a virtual extended screen, the
attached Virtual display driver must be
installed.
• Hide UI
Hides or displays the main user interface.
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication, unplug
the USB wireless LAN adapter from the projector.
Before unplugging, be sure to press the UNPLUG
button on the remote control and select [Yes] on
the screen by pressing the  or  button and then
ENTER button.
Using remote desktop
Connect a USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
One of the USB devices can be connected.
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double click "Virtual display driver.exe" contained
2. The Setup window is displayed. Click [Next]
3. When the installation has been completed, restart
To USB-A
terminal
Important:
• Do not switch the input source to USB Display
• When the image is projected, the computer
• During wireless LAN communication, the projector
• Only infrastructure mode is available to wireless
EN-41
in the folder "LAN Display System", and start up
the installer of the Virtual display driver.
and operate according to the instructions on the
window.
the computer.
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
resolution will be changed to WXGA/XGA according
to the projector model and will be automatically
recovered after the LAN Display System is ended.
cannot communicate with the access point.
LAN communication. Adhoc mode is not available.