Download Print this page

Edelbrock 36011 Installation Instructions page 2

Edelbrock corporation pro-tuner efi pressure sensors installation instructions

Advertisement

GENERAL SPECIFICATIONS:
Input Voltage:
4.9 to 5.1 volts DC
Overvoltage:
16 volts DC (maximum)
Reverse Polarity:
16 volts DC (maximum)
Supply Current:
5 mA (maximum)
Response Time:
6.0 mS (maximum) (To 63% of Step Input)
Minimum Load:
9.0 K OHMS (Pull-Up or Pull-Down)
DIMENSIONS:
1.67"
Catalog #36011, 36020
Rev. 5/06 - RS/mc
6.0"
Pig-Tail Harness
A - Ground (Black)
B - Supply Voltage (Gray)
C - Output Signal (Light Blue)
Figure 1 - Pig-Tail Wire Harness and Wire Color-Coding
SENSOR SPECIFICATIONS
.40"
1.00"
Figure 2 - Sensor Dimensions
B
Close-Up of Connector Pins
(Connector Side)
Pro-Tuner Harness
Ground (Black/Orange)
Supply Voltage (Purple/Yellow)
Output Signal (Yellow)
A (Ground)
2 of 4
A
C
B (Supply Voltage)
C (Output)
©2006 Edelbrock Corporation
Brochure #63-36020

Advertisement

loading

This manual is also suitable for:

36020