Table of Contents
Advertisement
RCU300_US_IB_REVC
7/16/03
Program for Satellite or Cable Box—
Direct Entry Method
In order for the 3 component universal remote to control your
satellite or cable box, you must program it with the code that
matches your component. The DBS•CABLE key can be
programmed to operate either a satellite receiver or a cable
box. These instructions explain the preferred method of
programming the remote—the Direct Entry method.
1. Manually turn on the satellite receiver
or cable box.
2. Locate the enclosed Satellite or Cable
Box Code List. Find your brand in the
Satellite Codes or Cable Box Codes
section, respectively.
Note:
one of the Code Search methods to
program this remote control (See Code
CODE
INDICATOR
Search on page 8).
SEARCH
LIGHT
3. Press and hold the CODE SEARCH
key until the indicator light illuminates.
Then release the CODE SEARCH key.
4. Press and release the DBS•CABLE
DBS•
(BLINK)
CABLE
key. The indicator light blinks and
AUX
then remains lit.
5. Use the number keys on the remote to
enter the first code listed for your brand.
1
2
3
After you enter a valid three-digit
4
5
6
code, the indicator light turns off.
7
8
9
Note:
0
LED will flash rapidly for 2 seconds.
Start over at step 3.
6. Aim the remote at your satellite
receiver or cable box and press
(OFF)
the ON•OFF key. If your Satellite
receiver or cable box turns off, you
have found the correct code.
ON•OFF
7. Enter the code in the box provided
on this page for future reference.
8. If your satellite receiver or cable box
doesn't turn off, repeat steps 3-6 above,
entering the next code for your brand.
DBS (SATELLITE)
If none of the codes work or your
OR
brand is not listed, use one of the
CABLE BOX CODE
Code Search methods to program
this remote (See Code Search on page 8).
For a description of each key on the
remote control, refer to the Key
Descriptions section page 3-4.
15:17
Page 7
If your brand isn't listed, use
If you enter an invalid code, the
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RCU 300 - SystemLink3 Universal Remote and is the answer not in the manual?
Questions and answers