HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury' or product or
property' damage, you will need two p_ple
to perform the
following instructions.
• With both hands, hold both sides of the door and pull it
up to separate it from the rails.
1. Removing Pullout Drawer
• Pull the drawer open to full extension,. Remove the
lower _sket
(1) by lifting _sket
from rail system,
(if you tilt the d_r,
it will be easier..)
• Press both hangers with your thumbs to lift it up.
• Separate the left and right rail cover
• Remove the screws(2) of the rail on both sides.
• With _th
hands, hold the center bar and push it in to let
both rails fitted simultaneously.
A CAUTION: When you remove the drawer, do not hold
the handle_ if it may"come off and it could cause
personal injury.
A CAUTION: When laying the drawer down, be careful
not to damage the floor or hurt your feet by the sharp
edges on hinge side.
13